Step 4: Initial Cluster Setup

Page Navigation:

Page Navigation:

 

 


Confidence Level TBD  This article has not been reviewed for accuracy, timeliness, or completeness. Check that this information is valid before acting on it.

Confidence Level TBD  This article has not been reviewed for accuracy, timeliness, or completeness. Check that this information is valid before acting on it.

 

When installation of the HySDS framework is complete on your mozart instance (see Installation), we must configure the rest of the cluster instances so that they can talk to each other. We do this using the sdscli command on the mozart instance. The idea is that all code and configuration is centralized on the mozart instance and when ready to deploy updates during the development cycle or when upgrading operations, we can push them easily from a single location.

  1. Configure your cluster parameters using sdscli: The sdscli repo was installed on your mozart instance during Installation. Configure your cluster by running:

    cd ~ source ~/mozart/bin/activate sds configure



  2. The sds configure command will prompt you for your cluster parameters. A description of the parameters with examples is provided below

*** LOOK OVER THE FIELDS AND HAVE THE VALUES READY BEFORE HAND ***

field

description

example

field

description

example

MOZART_PVT_IP

private IP address of mozartinstance

100.64.134.201

MOZART_PUB_IP

publicly accessible IP address of mozart instance, e.g. Elastic IP; can be the same as MOZART_PVT_IP

64.34.21.123

MOZART_FQDN

publicly resolvable FQDN of mozart instance; can be the same as MOZART_PVT_IP

gman-jobs.hysds.net

MOZART_RABBIT_PVT_IP

private IP address of mozartrabbitMQ instance (if running rabbitMQ on a different instance); otherwise replicate value from MOZART_PVT_IP

100.64.134.201

MOZART_RABBIT_PUB_IP

publicly accessible IP address of mozartrabbitMQ instance (if running rabbitMQ on a different instance); otherwise replicate value from MOZART_PUB_IP

64.34.21.123

MOZART_RABBIT_FQDN

publicly resolvable FQDN of mozart rabbitMQ instance (if running rabbitMQ on a different instance); otherwise replicate value from MOZART_FQDN

gman-jobs.hysds.net

MOZART_RABBIT_USER

rabbitMQ user account; default installed by rabbitMQ is guest

guest

MOZART_RABBIT_PASSWORD

rabbitMQ user password; default installed by rabbitMQ is guest

guest

MOZART_REDIS_PVT_IP

private IP address of mozartredis instance (if running redis on a different instance); otherwise replicate value from MOZART_PVT_IP

100.64.134.201

MOZART_REDIS_PUB_IP

publicly accessible IP address of mozart redis instance (if running redis on a different instance); otherwise replicate value from MOZART_PUB_IP

64.34.21.123

MOZART_REDIS_FQDN

publicly resolvable FQDN of mozart redis instance (if running redis on a different instance); otherwise replicate value from MOZART_FQDN

gman-jobs.hysds.net

MOZART_REDIS_PASSWORD

redis password (if AUTH is configured)

empty string or <redis password>

MOZART_ES_PVT_IP

private IP address of mozartelasticsearch instance (if running elasticsearch on a different instance); otherwise replicate value from MOZART_PVT_IP

100.64.134.201

MOZART_ES_PUB_IP

publicly accessible IP address of mozartelasticsearch instance (if running elasticsearch on a different instance); otherwise replicate value from MOZART_PUB_IP

64.34.21.123

MOZART_ES_FQDN

publicly resolvable FQDN of mozart elasticsearch instance (if running elasticsearch on a different instance); otherwise replicate value from MOZART_FQDN

gman-jobs.hysds.net

OPS_USER

ops account on HySDS cluster instances

ops or hysdsops or swotops

OPS_HOME

ops account home directory on HySDS cluster instances

/home/ops or /data/home/hysdsops

OPS_PASSWORD_HASH

sha224sum password hash for ops user account login to HySDS web interfaces

output of echo -n mypassword | sha224sum

LDAP_GROUPS

comma-separated list of LDAP groups to use for user authentication into HySDS web interfaces

hysds-v2,aria.users,ariamh

KEY_FILENAME

private ssh key to use for logging into other cluster instances; used for deployment via fabric

/home/ops/.ssh/my_cloud_keypair.pem

JENKINS_USER

account on ci instance that owns and runs the Jenkins CI server

jenkins

JENKINS_DIR

location of the Jenkins HOME directory (where jobs/ directory is located)

/var/lib/jenkins

METRICS_PVT_IP

private IP address of metrics instance

100.64.134.153

METRICS_PUB_IP

publicly accessible IP address of metricsinstance, e.g. Elastic IP; can be the same as METRICS_PVT_IP

64.34.21.124

METRICS_FQDN

publicly resolvable FQDN of metrics instance; can be the same as METRICS_PVT_IP

gman-metrics.hysds.net

METRICS_REDIS_PVT_IP

private IP address of metrics redis instance (if running redis on a different instance); otherwise replicate value from METRICS_PVT_IP

100.64.134.153

METRICS_REDIS_PUB_IP

publicly accessible IP address of metrics redis instance (if running redis on a different instance); otherwise replicate value from METRICS_PUB_IP

64.34.21.123

METRICS_REDIS_FQDN

publicly resolvable FQDN of metrics redis instance (if running redis on a different instance); otherwise replicate value from METRICS_FQDN

gman-metrics.hysds.net

METRICS_REDIS_PASSWORD

redis password (if AUTH is configured)

empty string or <redis password>

METRICS_ES_PVT_IP

private IP address of metrics elasticsearch instance (if running elasticsearch on a different instance); otherwise replicate value from METRICS_PVT_IP

100.64.134.153

METRICS_ES_PUB_IP

publicly accessible IP address of metricselasticsearch instance (if running elasticsearch on a different instance); otherwise replicate value from METRICS_PUB_IP

64.34.21.124

METRICS_ES_FQDN

publicly resolvable FQDN of metrics elasticsearch instance (if running elasticsearch on a different instance); otherwise replicate value from METRICS_FQDN

gman-metrics.hysds.net

GRQ_PVT_IP

private IP address of grqinstance

100.64.134.71

GRQ_PUB_IP

publicly accessible IP address of grq instance, e.g. Elastic IP; can be the same as GRQ_PVT_IP

64.34.21.125

GRQ_FQDN

publicly resolvable FQDN of grq instance; can be the same as GRQ_PVT_IP

gman-grq.hysds.net

GRQ_PORT

port to use for the grq2 REST API

8878

GRQ_ES_PVT_IP

private IP address of grqelasticsearch instance (if running elasticsearch on a different instance); otherwise replicate value from GRQ_PVT_IP

100.64.134.71

GRQ_ES_PUB_IP

publicly accessible IP address of grqelasticsearch instance (if running elasticsearch on a different instance); otherwise replicate value from GRQ_PUB_IP

64.34.21.125

GRQ_ES_FQDN

publicly resolvable FQDN of grq elasticsearch instance (if running elasticsearch on a different instance); otherwise replicate value from GRQ_FQDN

gman-grq.hysds.net

FACTOTUM_PVT_IP

private IP address of factotum instance

100.64.134.184

FACTOTUM_PUB_IP

publicly accessible IP address of factotuminstance, e.g. Elastic IP; can be the same as FACTOTUM_PVT_IP

64.34.21.126

FACTOTUM_FQDN

publicly resolvable FQDN of factotum instance; can be the same as FACTOTUM_PVT_IP

gman-factotum.hysds.net

CI_PVT_IP

private IP address of ciinstance

100.64.134.179

CI_PUB_IP

publicly accessible IP address of ci instance, e.g. Elastic IP; can be the same as CI_PVT_IP

64.34.21.127

CI_FQDN

publicly resolvable FQDN of ci instance; can be the same as CI_PVT_IP

gman-ci.hysds.net

VERDI_PVT_IP

private IP address of verdiinstance; if no verdiinstance, use ci instance value for CI_PVT_IP

100.64.134.179

VERDI_PUB_IP

publicly accessible IP address of verdi instance, e.g. Elastic IP; if no verdiinstance, use ci instance value for CI_PUB_IP

64.34.21.127

VERDI_FQDN

publicly resolvable FQDN of verdi instance; if no verdi instance, use ciinstance value for CI_FQDN

gman-ci.hysds.net

JENKINS_API_USER

Jenkins user account to use for access to Jenkins API

gmanipon

JENKINS_API_KEY

Jenkins user API key to use for access to Jenkins API. Go to an already set up Jenkins web page and click on “People”, your username, then “Configure”. Click on “Show API Token”. Use that token and you username for API_USER.

<api key>

DAV_SERVER

WebDAV server for dataset publication (optional); leave blank if using S3

aria-dav.jpl.nasa.gov

DAV_USER

WebDAV server account with R/W access

ops

DAV_PASSWORD

DAV_USER account password

<password>

DATASET_AWS_ACCESS_KEY

AWS access key for account or role with R/W access to S3 bucket for dataset repository

<access key>

DATASET_AWS_SECRET_KEY

AWS secret key for DATASET_AWS_ACCESS_KEY

<secret key>

DATASET_AWS_REGION

AWS region for S3 bucket for dataset repository

us-west-2

DATASET_S3_ENDPOINT

S3 endpoint for the DATASET_AWS_REGION

s3-us-west-2.amazonaws.com

DATASET_S3_WEBSITE_ENDPOINT

S3 website endpoint for the DATASET_AWS_REGION

s3-website-us-west-2.amazonaws.com

DATASET_BUCKET

bucket name for dataset repository

ops-product-bucket

AWS_ACCESS_KEY

AWS access key for account or role with R/W access to S3 bucket for code/config bundle and docker image repository; can be the same as DATASET_AWS_ACCESS_KEY

<access key>

AWS_SECRET_KEY

AWS secret key for AWS_ACCESS_KEY; can be the same as DATASET_AWS_SECRET_KEY

<secret key>

AWS_REGION

AWS region for S3 bucket for code/config bundle and docker image repository

us-west-2

S3_ENDPOINT

S3 endpoint for the AWS_REGION

s3-us-west-2.amazonaws.com

CODE_BUCKET

bucket name for code/config bundle and docker image repository

ops-code-bucket

VERDI_PRIMER_IMAGE

S3 url to verdi docker image in CODE_BUCKET

s3://ops-code-bucket/hysds-verdi-latest.tar.gz

VERDI_TAG

docker tag for verdi docker image

latest

VERDI_UID

UID of ops user on ciinstance; used to sync UID upon docker image creation

1001

VERDI_GID

GID of ops user on ciinstance; used to sync GID upon docker image creation

1001

QUEUES (v2.* and earlier)

space-delimited list of queues to create autoscaling code/config bundles for

"dumby-job_worker-small dumby-job_worker-large"

INSTANCE_TYPES (v2.* and earlier)

space-delimited list of instance types to use for the corresponding queue as defined in QUEUES

"t2.micro t2.micro"

QUEUES (v3.* and later)

list of queue configurations specifying the queue name and the list of instance types to configure for the autoscaling fleet of workers that will pull from the queue; for each queue configuration, a code/config bundle will be generated

QUEUES: - QUEUE_NAME: dumby-job_worker-small INSTANCE_TYPES: - t2.medium - t3a.medium - t3.medium - QUEUE_NAME: dumby-job_worker-large INSTANCE_TYPES: - t2.medium - t3a.medium - t3.medium

VENUE

unique tag name to differentiate this HySDS cluster from others

e.g. ops or dev or oasis or test

PROVES_URL

url to PROV-ES server (optional)

https://prov-es.jpl.nasa.gov/beta

PROVES_IMPORT_URL

PROV-ES API url for import of PROV-ES documents (optional)

https://prov-es.jpl.nasa.gov/beta/api/v0.1/prov_es/import/json

DATASETS_CFG

location of datasets configuration on workers

/home/ops/verdi/etc/datasets.json

SYSTEM_JOBS_QUEUE

name of queue to use for system jobs

system-jobs-queue

GIT_OAUTH_TOKEN

optional Github OAuth token to use on ci instance when checking out code for continuous integration (optional)

<token>

CONTAINER_REGISTRY

if using the container registry feature, the URL location of the container registry (optional)

localhost:5050

CONTAINER_REGISTRY_BUCKET

if using the container registry feature, the bucket that will be used for the docker registry's storage backend

ops-code-bucket

  1. Make sure elasticsearch is up on the mozart and grq instances. You can run the following command to check:

    curl 'http://<mozart/grq ip>:9200/?pretty'



    you should get answer back from ES, something like this:



    If you can not connect to elastic search, you need to start ElasticSearch in mozart and grq instances:



  2. Ensuremozartcomponent can connect to other components over ssh using the configuredKEY_FILENAME. If correctly configured, thesds status allcommand should show that it was able to ssh into each component to check that thesupervisorddaemon was not running like below:

    Otherwise if any of the components show the following error, for example for the grq component:

    then there is an issue with the configuredKEY_FILENAMEonmozartor theauthorized_keysfile under the component's~/.sshdirectory for userOPS_USER. Resolve this issue before continuing on.

  3. Update all HySDS components:

    If you receive any errors, they will need to be addressed.

  4. Start up all HySDS components:

  5. View status of HySDS components and services:

  6. During installation, the latest versions of thelightweight-jobscore HySDS package and theverdidocker image was downloaded. Next we import thelightweight-jobspackage:





  7. Finally we copy theverdidocker image to the code bucket (CODE_BUCKETas specified duringsds configure). EnsureVERDI_PRIMER_IMAGEurl is consistent:

Next Step

Now that you have your HySDS cluster configured, continue on to Step 5: Running your First "Hello World" Job




Related Articles:

Related Articles:

Have Questions? Ask a HySDS Developer:

Anyone can join our public Slack channel to learn more about HySDS. JPL employees can join #HySDS-Community

JPLers can also ask HySDS questions at Stack Overflow Enterprise

 

Search HySDS Wiki

Page Information:

Page Information:

Was this page useful?

Yes No

Contribution History:

Subject Matter Expert:

@Gerald Manipon

@Hook Hua

Find an Error?

Is this document outdated or inaccurate? Please contact the assigned Page Maintainer:

@Lan Dang

Note: JPL employees can also get answers to HySDS questions at Stack Overflow Enterprise: